Agreed. Pete in the debate would have been a dramatically different situation. I’d happily watch him fact check all day long.

Yep, I saw that line and have zero patience for these people. I have a birth defect that made it impossible for my wife and I to naturally conceive. In our case IVF was the ONLY viable treatment option.

We were lucky enough to be successful and we’re presently sitting at the hospital waiting for the birth of our first child. We plan to have another from our remaining frozen embryos. Our timetable may be moved up though by the threat of a bunch of morons trying to legislate our health and ability to have the family we want.

Lots of good advice here. I’ve got a bunch of older WD Reds still in service (from before the SMR BS). I’ve also had good luck shucking drives from external enclosures as well as decommissioned enterprise drives. If you go that route, depending on your enclosure or power supply in these scenarios you may run into issues with a live 3.3V SATA power pin causing drives to reboot. I’ve never had this issue on mine but it can be fixed with a little kapton tape or a modified SATA adapter. It’s definitely cheaper to shuck or get used enterprise for capacity! I’m running at least a dozen shucked drives right now and they’ve been great for my needs.

Also, if you start reaching the point of going beyond the ports available on your motherboard, do yourself a favor and get a quality HBA card flashed in IT mode to connect your drives. The cheapo 4 port cards I originally tried would have random dropouts in Unraid from time to time. Once I got a good HBA it’s been smooth sailing. It needs to be in IT mode to prevent hardware raid from kicking in so that Unraid can see the individual identifiers of the disks. You can flash it yourself or use an eBay seller like ThArtOfServer who will preflash them to IT mode.

Finally, be aware that expanding your array is a slippery slope. You start with 3 or 4 drives and next thing you know you have a rack and 15+ drive array.

Aaaaand yes, this judge was another Trump appointee.

It seems a lot of the new ones have a cellular modem. On the surface it’s to let you remotely access the car or do a remote start. Even if you don’t pay to subscribe and use it for your purposes they can utilize it to transfer out the data.

Ditto. Mine was stolen out of my car 9 years ago and I still miss it.

I don’t think I realized that was a limitation because I’ve been using the Vaultwarden fork. https://github.com/dani-garcia/vaultwarden

Same, though I’ve got a couple Decepticons sprinkled in. They all connect to the Allspark ssid.

Seconding the Shield, for all of the above plus Nvidia’s update commitment to it. IIRC the 2015 Shield is the longest continually updated Android device ever. I have a 2015, 2017, and a 2019 at my house, and a couple of 2017s at my parents’ place. I upgraded the older ones to the toblerone remote last year. All are still working great, and continuing to receive regular updates.

My error, I just checked and apparently it’s actually a Precision. I don’t deal in Dells so I don’t know all their nomenclature! It’s still been a downgrade though from my ThinkPad.

Well said. I had hardware that was killed by “upgrades” or manufacturers discontinuing them from their cloud features. I now instal locally controllable hardware as much as possible and it has led to a much more stable and long term reliable smart home. Everything ties back into Home Assistant. The only remaining things I have with a cloud-reliant integration are the robovac our Nest Protect Smoke Alarms, and smart vents. The only reason they’re cloud controlled is there wasn’t a viable option that met feature and price point requirements. Everything else, (65+devices) is local Wi-Fi/Homekit ZigBee or Z-Wave

Even on the Windows side of things they’re frustrating. Company took my perfectly working Thinkpad and replaced it last September with an “upgraded” Dell Inspiron laptop. It’s a piece of crap. Wakes up all the time in my bag, randomly drops wifi, and randomly drops ViewSonic monitors. Official IT solution: this happens sometimes, we don’t know why, and we’re going to send you Dell monitors instead.

*Edit I guess it’s actually a Precision, not Inspiron. I don’t buy Dells so I don’t know all the names!

$8 Million in cash on hand at the start of 2024 per FEC filings. So no.

Happens all the time with patients I see on disability or Medicaid. I had a patient tell me last week about how his social security disability income is tight and we “need Trump back to fix things.” Yeah okay, good luck with that buddy.

Great advice from everyone here. For the transcoding side of things you want an 8th gen or newer Intel chip to handle quicksync and have a good level of quality. I’ve been using a 10th gen i5 for a couple of years now and it’s been great. Regularly handles multiple transcodes and has enough cores to do all the other server stuff without an issue. You need Plex Pass to do the hardware transcodes if you don’t already have it or can look at switching to Jellyfin.

As mentioned elsewhere, using an HBA is great when you start getting to large numbers of drives. I haven’t seen random drops the way I’ve seen occasionally on the cheap SATA PCI cards. If you get one that’s flashed in “IT mode” the drives appear normally to your OS and you can then build software raid however you want. If you don’t want to flash it yourself, I’ve had good luck with stuff from The Art of Server

I know some people like to use old “real” server hardware for reliability or ECC memory but I’ve personally had good luck with quality consumer hardware and keeping everything running on a UPS. I’ve learned a lot from serverbuilds.net about compatibility works between some of the consumer gear, and making sense of some of the used enterprise gear that’s useful for this hobby. They also have good info on trying to do “budget” build outs.

Most of the drives in my rack have been running for years and were shucked from external drives to save money. I think the key to success here has been keeping them cool and under consistent UPS power. Some of mine are in a disk shelf, and some are in the Rosewill case with the 12 hot swap bays. Drives are sitting at 24-28 degrees Celsius.

Moving to the rack is a slippery slope… You start with one rack mounted server, and soon you’re adding a disk shelf and setting up 10 gigabit networking between devices. Give yourself more drive bays than you need now if you can so you have expansion space and not have to completely rearrange the rack 3 years later.

Also if your budget can swing it, it’s nice keeping other older hardware around for testing. I leave my “critical” stuff running on one server now so that a reboot when tinkering doesn’t take down all the stuff running the house. That one only gets rebooted or has major changes made when it’s not in use (and wife isn’t watching Plex). The stuff that doesn’t quite need to be 24/7 gets tested on the other server that is safe to reboot.

There’s a bit more to it than just the Central Perk part. They’ve recreated the apartments and a few other major scenes and have a lot of props from the show. We had just finished a rewatch of the show and found it pretty enjoyable on a rainy day in the city. I think we spent about an hour in there and came out with some cool staged scene pictures. I still thought it was overpriced, but didn’t feel ripped off.

I think about the Ameristan stuff and people being “facebooked” all the time since reading that book. In the time since I read it I feel like we just keep getting closer and closer to that reality.

I’ve been using one for several years now with one of the documented switches that add multiple ports. https://docs.pikvm.org/ezcoo/#connections First in a DIY and then with the v3 hat Kickstarter I guess total I’m at $270 between the Kickstarter HAT and ezcoo switch plus the cost of a Pi (which I already had) I can reach 4 machines over my Tailnet and jump between them reliably. I can also control power on my primary server. (others are on a network managed PDU and can be forcibly reset that way if needed)

I had an old console from a job but it was so old that it required an ancient version of Java to access through the web interface. I’m sure there may be better options, but for my homelab setup the pikvm has worked well at a price that fit in my budget.

I’ve had the exact opposite experience historically. Of 5 Seagate drives I’ve purchased over the last decade or so, only 1 of them is still working. Meanwhile 25+ WD hard drives are still in production over the same time with only 1 that started throwing smart errors a couple years back.

Yeah, Paxlovid didn’t exist the last time I had COVID. The mouth taste off of it is indeed weird, but the fact that I already stopped feeling the brain fog is a huge plus. I was feeling the brain fog for a good month or so after my last infection.